深圳厂家 排队叫号机17/19寸立式触摸屏/电阻触摸屏

项目

Item

内容

Contents

注意

Notes

高温保存

High temperature preservation

(1)温度85℃,放置240小时；(2)室温放置24小时以上；(3)然后测量以下

项目：不可有结露

(1) Store at 85℃for 240 hours; (2) Keep at a room temperature for more than 24 hours; and (3) Measure (satisfy) the following items: no dew condensation

端子间阻抗：参照电气特性栏Resistance between terminals: see electrical property item;直线性：参照电气特性栏Linearity: see electrical property item;绝缘阻抗：参照电气特性栏Insulation resistance: see electrical property item.

低温保存

Low Temperature

preservation

(1)温度-30℃,放置240小时；(2)室温放置24小时以上；(3)然后测量以下

项目：不可有结露

(1) Store at-30℃for 240 hours; (2) Keep at a room temperature for more than 24 hours; and (3) Measure (satisfy) the following items: no dew condensation

端子间阻抗：参照电气特性栏Resistance between terminals: see electrical property item;直线性：参照电气特性栏Linearity: see electrical property item;绝缘阻抗：参照电气特性栏Insulation resistance: see electrical property item.

高温高湿保存

High Temperature

& high humidity

(1)温度80℃湿度90%,放置240小时；(2)室温放置24小时以上；(3)然后测量以下项目：不可有结露

(1) Store at 80℃and 90% RH for 240 hours; (2) Keep at a room temperature for more than 24 hours; and (3) Measure (satisfy) the following items: no dew condensation

端子间阻抗：参照电气特性栏Resistance between terminals: see electrical property item;直线性：参照电气特性栏Linearity: see electrical property item;绝缘阻抗：参照电气特性栏Insulation resistance: see electrical property item.

冷热冲击测试

Heat shook test

(1)-30℃（60分）→70℃（60分）共10次循环；(2)室温放置24小时以上；(3)然后测量以下项目：不可有结露

(1) -30℃(60min)→70℃(60min) total 10 cycles, (2) Keep at the room temperature for more than 24 hours; and (3) Measure (satisfy) the following items: no dew condensation

端子间阻抗：参照电气特性栏Resistance between terminals: see electrical property item;直线性：参照电气特性栏Linearity: see electrical property item;绝缘阻抗：参照电气特性栏Insulation resistance: see electrical property item.

项目

Item

内容

Contents

注意

Notes

耐敲击

Hitting Durability

(1)使用Placental(POM)铅笔(R0.8)敲击100万次。(2)然后测量以下项目：

(1) Hit 1,000,000 times with a Placenta (POM) pencil (R0.8); and (2) Measure (satisfy) the following items:

荷重：2N          Load:2N

速度：2次/ Sec    Speed: 2times/sec

端子间阻抗：参照电气特性栏Resistance between terminals: see electrical property item;直线性：参照电气特性栏Linearity: see electrical property item;绝缘阻抗：参照电气特性栏Insulation resistance: see electrical property item.

耐久划线

Sliding Durability

(1)使用Placental(POM)铅笔(R0.8)在AA区域边缘内缩3mm往复划线性

10万次；(2)然后测量以下项目：

(1) Shuttle 100,000 times with a placenta (POM) pencil (R0.8) shrinks 3mm from the AA verge; and (2) Measure (satisfy) the following items:

荷重：2N              Load: 2N

速度：100mm / Sec      Speed: 100mm/Sec

端子间阻抗：参照电气特性栏Resistance between terminals: see electrical property item;直线性：参照电气特性栏Linearity: see electrical property item;绝缘阻抗：参照电气特性栏Insulation resistance: see electrical property item.

FPC弯曲

FPC Bending

Durability

(1)在FPC末端附上100g力；(2)接着以附着力的部分作不弯曲中心(各弯

曲180度5回)。结果应该满足以下几项：

(1) Attach a 100g weight to the end of FPC; (2) Bend the FPC at the angle

Of±180°each for the 5 times, with the FPC adhered portion as the center of bending movement.

The result shall satisfy the following:

端子间阻抗：参照电气特性栏Resistance between terminals: see electrical property item;直线性：参照电气特性栏Linearity: see electrical property item;绝缘阻抗：参照电气特性栏Insulation resistance: see electrical property item.

FPC拉力测试

FPC Heat Seal

Peeling Testing

(1)垂直90°方向：500g力5分钟；不可剥离；应满足以下几项：

  端子间阻抗：参照电气特性栏；

Vertically 90°direction: After 0.5Kg 5min there is not peeling;

The result shall satisfy following items:

(2)水平180°方向：500g力10分钟；不可剥离；应满足以下几项目：

  端子间阻抗：参照电气特性栏；

Horizontal 180°direction: After 0.5Kg 10min there is not peeling;

The result shall satisfy following items:

Resistance between terminals: see electrical property item

FPC耐弯曲性

FPC pattern

Bending

resistance

弯曲半径为7mm，拉伸长度=25mm，速度为1500rpm；弯曲次数为10

万次，就满足以下几项目：参照电气特性栏；

Bending 100,000 times by radius 7mm, length of peeling stroke 25mm, Speed 1500rpm; the result shall satisfy following items:

Resistance between terminals: see electrical property item

金手指处焊接性

Gold-finger sold

heat

温度：235+/-5℃；时间：3-5秒：焊点光滑圆润

Temperature: 235+/-5℃; Time: 3 – 5 sec, sold-dot smooth surface